CIO-EXP16 and CIO-EXP32 from $249
16 or 32 Channel Multiplexers for Voltage or Thermocouples
- 16 or 32 Fully Differential Inputs
- On-Board Signal Amplifiers
- Cold Junction Compensation for Thermocouples
- Designed for CIO-DAS Series Cards
The CIO-EXP16 and CIO-EXP32, respectively, are 16 and 32 channel analog signal
multiplexers. These accessory boards, designed for the CIO-DAS08 and CIO-DAS16
cards, can also be used with virtually any A/D board in a variety of multiplexing
applications. The CIO-EXP16 multiplexers 16 inputs into a single A/D board channel.
The CIO-EXP32 is virtually two CIO-EXP16's, capable of multiplexing 32 inputs into
two A/D channels. The A/D card selects the MUX input channel by sending a 4-bit binary
value representing that channel. Digital output lines on the A/D card perform this function.
The CIO-EXP boards provide on-board amplifiers for use with low level signals as
well as cold junction compensation circuitry, enabling them to read thermocouples directly.
Either four CIO-EXP32 or eight CIO-EXP16 boards may be connected to a CIO-
DAS08, thereby expanding the total number of analog inputs to 128.
Either eight CIO-EXP32 or sixteen CIO-EXP16 boards may be connected to a CIO-
DAS16, expanding the total number of analog inputs to 256. When used with
thermocouples, one A/D board channel is required for the cold junction signal, thus
reducing the maximum system analog input channel capacity by 16. If connecting to a
CIO-DAS16, the C-MUXAD16-10 cable must be used to connect the CIO-DAS16 to the
first CIO-EXP, and the CIO-PG408 DC/DC converter must be installed in each CIO-EXP
board.
View an Adobe Acrobat pdf file for more
product info (requires Acrobat Reader).
U.S.A. and Canada
|
|
International Callers;
Sales and Service; 203.359.1660
|
|
Please E-Mail any comments
or suggestions to OMEGA®.
® Copyright 1999
OMEGA
ENGINEERING, INC. ALL RIGHTS RESERVED |
|